Fenwal

Temperature control solutions

The "perfect" fry. Appetizingly served. Hot and crisp. It's among the final test for Fenwal temperature controls in the long food processing cycle.

We help the food industry stay hot . . . or cold. From seedling to serving tray we've helped engineer away some of the most critical temperature control problems of equipment suppliers in the food processing and preparation industry. From our legendary THERMOSWITCH® temperature controller to our newest electronic board level controllers, equipment suppliers have come to base their reputation on our reputation.

When you look at our more than 250 products, and add our engineering support and services, you'll understand why Fenwal is big in food. And it doesn*t end there. Fenwal has been supplying industrial customers with precision temperature control equipment since 1935.

For more information on our complete line of temperature control products, contact your local Fenwal representative.

Fenwal, 400 Main Street, Ashland, MA 01721, 800/FENWAL-1, 508/ 881-2000, Fax: 508/ 231-2089 www.fenwalcontrols.com

Thermik Corporation

Thermal protection for electrical wingdings.

Need to protect small motors and transformers from over-heating? Try these three new snap action, bimetallic temperature limiting switches from Thermik.

The Type SP1 Temperature Limiting Switch is applied where resettable overheating protection is required, but where automatic resetting and equipment restarting is not desired or permitted. This controllable reset function can be used to provice increased personnel safety.

The Type SW1 Current Sensitive, Temperature Limiting Switch is ideal for transformer protection. Under an electrical overload, the thermal conditions surrounding the coil determine the trip response. However, under a short circuit condition, a series resistor produces added heat to speed the trip response. Like the Type SP1, the operating voltage must be switched off and substantial cooling must take place to reset.

The Type SZ1 Current Sensitive, Thermal Protector is used in applications where the trip time needs to vary greatly in response to the load current, and automatic reset is either desired or is not objectionable.

For additional information contact: Frederick W. Goeckerman, VP/General Manager, Thermik Corporation, 80 Beamon Road, New Bern, NC 28562, 252/636-5720, Fax: 252/636-5737, e-mail: info@thermik.com

Portage Electric Products, Inc.

PEPI thermostat offers economy and flexibility.

The PEPI Model E is a creep action thermostat ideal for appliance applications. The Model E is a low profile thermostat available with or without factory-attached lead wires. The opposite end terminations offer flexible installation options.

The Model E is available with a choice of two different bimetallic elements to cover a variety of applications. The bimetallic element carries the circuit current. This new thermostat had already been evaluated for use in heating pads and electric blankets and is available with preset nominal calibration temperature from 30°C to 90°C. The Model E has contact ratings of 2 amps/125 volts AC resistive.

For more information on the new PEPI Model E, or any other device from the wide selection of PEPI thermal controls and thermal protectors, contact: Portage Electric Products, Inc., 7700 Freedom Ave., N.W., P.O. Box 2170, North Canton, OH 44720, 888/GO-4-PEPI, Fax: 330/499-1853, http://www.pepiusa.com

Kanthal

Wire, ribbon & strip

America’s finest Element Makers and OEM’s rely on Kanthal. The world’s largest manufacturer of resistance materials, KANTHAL offers alloys covering the widest range of appliance applications. This broad range of experience gives KANTHAL the edge in delivering resistance materials to precisely meet the most stringent cost and performance requirements.

Take advantage of KANTHAL’s broad-range experience. Technical service and support are essential when matching the right resistance material to an application. KANTHAL’s experience and enthusiastic service can measurably help streamline the process of moving a new project forward into production. When you need the right element material, at the right price, for any application, call 1-800- K A N T H A L and put the partnership to work for you.

KANTHAL 119 Wooster Street, Bethel, CT 06801 1-800-KANTHAL

Campini

ISO series single-pole bimetallic thermostats.

For more than 35 years, Termoregulatori CAMPINI S.p.a. has striven to offer qualified products to satisfy the appliance industry's requirements.

CAMPINI was the first company in Italy to produce thermostats for small electrical household appliances and is now a leader in the field of thermoregulation.

CAMPINI series Ty23 and Ty24 are single-pole bimetallic thermostats. The differential and setpoint temperature can vary according to the application.

Control Range: 0-260 degrees C Tolerances on Operating Range: +/-10 to +/- 15 degrees K Differential: 8-12K Temperature change speed: >1K/min. Braking Capacity: 10A or 15A/250V~ Minimum Current: 200mA Max. ambient temperature: T300 Approved VDE (DIN 0631): II - 100.000 cycles Rotation angle of the pivot: 300 deg. of arc. approx Built according to the standard: IEC 730-1/EN 60730-1 Other approvals: UL, CSA, please ask for approval list

CAMPINI has earned the CSQ brand certifying its quality systems according to the UNI-EN 9001 (ISO 9001).

For more information on the CAMPINI, or any other device from the wide selection of thermal controls and thermal thermostats and thermal protectors, contact: BurlingINSTRUMENTS, P.O. Box 298, 16 River Road, Chatham, NJ 07928-0298, TEL: 800/635-2526, 973/635-0481, FAX: 973/635-9530.